TFTP Timeout on Client (DHCP ok)

  1. 5 months ago

    Setup: Windows 7: Clone Deploy Server, Clone Deploy Proxy and TFTPD32 all on one server.

    DHCP working great, client computer gets an i.p. address from TFTD32 DHCP Server. But TFTP just times out.

    On the TFTPD32 logs, I see:

    Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 18:03:73:D6:82:73 [16/02 09:47:53.801]
    Client requested address 0.0.0.0 [16/02 09:47:53.801]
    DHCP: proposed address 192.168.0.20 [16/02 09:47:55.346]
    2932 Request 2 not processed [16/02 09:47:55.346]
    Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 18:03:73:D6:82:73 [16/02 09:47:59.402]
    Previously allocated address 192.168.0.20 acked [16/02 09:47:59.402]
    2932 Request 2 not processed [16/02 09:47:59.402]
    Connection received from 192.168.0.20 on port 2070 [16/02 09:47:59.402]
    Error : connect returns 10051: <A socket operation was attempted to an unreachable network.> [16/02 09:47:59.402]
    Connection received from 192.168.0.20 on port 2071 [16/02 09:48:01.430]
    Error : connect returns 10051: <A socket operation was attempted to an unreachable network.> [16/02 09:48:01.430]
    Connection received from 192.168.0.20 on port 2072 [16/02 09:48:05.439]
    Error : connect returns 10051: <A socket operation was attempted to an unreachable network.> [16/02 09:48:05.439]
    Connection received from 192.168.0.20 on port 2073 [16/02 09:48:11.429]
    Error : connect returns 10051: <A socket operation was attempted to an unreachable network.> [16/02 09:48:11.429]
    Connection received from 192.168.0.20 on port 2074 [16/02 09:48:19.393]
    Error : connect returns 10051: <A socket operation was attempted to an unreachable network.> [16/02 09:48:19.393]

    Any ideas?

    Thanks!

  2. clonedeploy

    Feb 16 Administrator

    I'm confused with this in regards to your other post. Is this still an issue? You should always start without proxy dhcp (as stated in the documentation). I would stop proxy dhcp, remove option 60, make sure the bootfile is still set to pxeboot.0
    Then,
    verify all ip info assigned to the nic and dhcp scope, gateways etc, all match up.

 

or Sign Up to reply!