M

mepting

Member

Last active 3 weeks ago

  1. 3 weeks ago
    Tue Jul 25 21:23:01 2017
    M mepting posted in HP ProBook 450 G4 - Boot Issues.

    Thank you so much for your help!

  2. Sat Jul 22 19:00:41 2017
    M mepting posted in HP ProBook 450 G4 - Boot Issues.

    Thanks for the reply. Where is the information for upgrading the kernel?

  3. Fri Jul 21 02:19:03 2017
    M mepting started the conversation HP ProBook 450 G4 - Boot Issues.

    Trying to upload a new image from a HP ProBook 450 G4 and having issues. I'm able to boot to the USB drive and select "Upload Image". However after making the selection it seems to freeze at a black screen and will not proceed. Any help would be much appreciated! Thank you for all your support =)

  4. 2 months ago
    Mon Jun 12 21:32:08 2017

    I believe the issue is related to having the SecureBoot option on. I disabled this and it's working now

  5. Mon Jun 12 18:58:33 2017

    I'm trying to boot via PXE and I'm having issues. The initial PXE process is working and communicating with the TFTP server. But when the client starts to download, I receive an error "Peer returns ERROR <User aborted the transfer> -> aborting transfer". The full log from the TFTP server is below. Thanks for you help!

    Connection received from 172.25.0.201 on port 1438 [12/06 11:33:46.412]
    Read request for file <pxeboot.0>. Mode octet [12/06 11:33:46.428]
    OACK: <tsize=409001,blksize=1468,> [12/06 11:33:46.428]
    Using local port 60985 [12/06 11:33:46.428]
    Peer returns ERROR <User aborted the transfer> -> aborting transfer [12/06 11:33:46.428]
    Connection received from 172.25.0.201 on port 1439 [12/06 11:33:46.428]
    Read request for file <pxeboot.0>. Mode octet [12/06 11:33:46.428]
    OACK: <blksize=1468,> [12/06 11:33:46.444]
    Using local port 60986 [12/06 11:33:46.444]
    <pxeboot.0>: sent 279 blks, 409001 bytes in 0 s. 0 blk resent [12/06 11:33:46.647]
    Connection received from 172.25.0.201 on port 1687 [12/06 11:34:39.335]
    Read request for file <pxeboot.0>. Mode octet [12/06 11:34:39.335]
    OACK: <tsize=409001,blksize=1468,> [12/06 11:34:39.335]
    Using local port 60988 [12/06 11:34:39.335]
    Peer returns ERROR <User aborted the transfer> -> aborting transfer [12/06 11:34:39.352]
    Connection received from 172.25.0.201 on port 1688 [12/06 11:34:39.352]
    Read request for file <pxeboot.0>. Mode octet [12/06 11:34:39.352]
    OACK: <blksize=1468,> [12/06 11:34:39.352]
    Using local port 60989 [12/06 11:34:39.352]
    <pxeboot.0>: sent 279 blks, 409001 bytes in 0 s. 0 blk resent [12/06 11:34:39.554]

  6. Thu Jun 8 16:50:59 2017

    Yes, I tested another PC and it's working there. Thanks for your help!

  7. Thu Jun 8 14:39:39 2017

    I was able to boot UEFI using a CD instead of the USB drive. However getting the same error message. Thoughts?

  8. Thu Jun 8 02:21:59 2017

    I'm sure its the EFI as I'm not booting the USB boot device with EFI. I'm unable to get the USB boot device to show up until I enable Legacy Support.

  9. Thu Jun 8 00:55:20 2017

    I just recently setup CloneDeploy and trying to take the first image. However I keep getting "ERROR: NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE!" I have tried running chkdsk /f and no issues are found. I also tested from another laptop with the same results. I have attached the On-Demand log. Thanks for your support.

  10. Wed Jun 7 22:32:26 2017
    M mepting joined the forum.