L

lipster

Member

Last active 2 days ago

  1. 2 days ago
    Fri Jun 22 12:08:42 2018
    L lipster posted in Server Error Clonedeploy.

    I get this sometimes when starting a deploy as well.

  2. last week
    Wed Jun 13 13:00:15 2018
    L lipster started the conversation Server Error Clonedeploy.

    I am still running 1.3.3 but wanted to post this error that I get pretty often. Going back to the CloneDeploy start page always fixes it but it is a little annoying.
    It normally happens after changing a machines image and going to deploy or upload that image.

  3. 7 weeks ago
    Fri May 4 12:01:12 2018

    Thanks for your help. I was able to add the drivers and it booted up but I forgot that my image was linux and not PE. I got the attached error and the hard drive got wiped. Is there a way to convert an image from linux to winpe?

    So I noticed that windows PE did not auto boot from the hard disk if there was no tasks. It just sits at the No Active Web Task Were Found For This Computer. Starting On Demand Imaging. Is there a way to set a time limit on this page to boot from hard drive?

    I ended up turning off the secure boot and I got the linux working with the normal 4.13.2 Kernel.

    I have a question about the Proxy DHCP Reservation under computers. Does the check mark have to be checked for those setting to work? And does that automatically add the data to the proxy reservations file?

  4. Wed May 2 20:29:31 2018
    L lipster started the conversation WINPE PXE Booting Could Not Contact CloneDeploy Server.

    I have been searching through the forums for an answer and haven't found one even though there have been several questions on this.
    I have tried quite a few options.
    I am using the proxy and have an older pc image fine with the IPXE environment.
    I added the Universal Token to the WINPE environment before I created it and I restarted all the services after adding them files to the server.
    Any help would be appreciated, I am about ready to turn off the secure boot on the computer.

  5. 4 months ago
    Wed Feb 21 18:33:08 2018

    It almost seems like it is not sending the selected computers at all. Like sending an empty array. Maybe it has to do with skipping 2 computers in a list that are not in order.

  6. Thu Feb 15 02:25:39 2018

    Sorry for the late response.
    Version 1.3.3
    Yeah pretty consistently. I have a total of 81 computers. I will select from the list 6, 10-18, 24-36 and hit deploy it will ask yes or no. I hit yes and nothing happens. If I just do 6, 10-18 it's fine. I can go back and do another task with the other 24-36 and it works as well.

    I know this worked in the last build I used but I can't remember if it was 1.3.1 or a 1.2 version

  7. Mon Jan 29 15:04:35 2018
    L lipster started the conversation Start Computer Task Selected Computers.

    I have noticed this happen a few times and I am not sure exactly what is going on.

    On the Start Computer Task module.
    When selecting some computers normally a lot (20 or so) normally skipping some in the order of the list. Once I click on deploy selected it will pop up with a confirmation and once I confirm the tasks never process. When they do not process there isn't a confirmation message of it being successful.

    I think this is amount that I am selecting but it could also be that they are not in order? I can do some testing or get you a log if you need it. Thanks!

  8. 5 months ago
    Wed Jan 10 20:09:36 2018
    L lipster posted in Auto Log off GUI 1.3.3.

    Here is the Error

    Server Error in '/clonedeploy' Application.
    Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

    Exception Details: System.ArgumentException: Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.

    Source Error:

    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

    Stack Trace:

    [ArgumentException: Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.]
    System.Web.UI.ClientScriptManager.ValidateEvent(String uniqueId, String argument) +11835054
    System.Web.UI.Control.ValidateEvent(String uniqueID, String eventArgument) +143
    System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +41
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5062

  9. Wed Jan 10 19:42:18 2018
    L lipster started the conversation Auto Log off GUI 1.3.3.

    On version 1.3.3 it seems like when the GUI auto logs you out after a certain amount of time of inactivity, when you try to do a command it brings you to a application error screen. On the older versions at least 1.2 it would bring you back to the logon screen rather than show you the error.

  10. 7 months ago
    Thu Oct 26 13:28:33 2017
    L lipster posted in Client Boot menu CloneDeploy.

    Yeah just tested email and I had the port incorrect :/ Corrected the port and it is now working :)

    I thought client menu boot options might have to do with how I set up the the permissions. I am so happy you are still working on this. I'll keep testing.

View more