EFI Deploy Issues
I have just setup a new Clonedeploy 1.3.0 as our old CrucibleWDS install wasn't wanting to work with our newer EFI based machines. When we upload an image all seems to be fine but as soon as we try and deploy that image to any other machine (identical machines as they were bought in a batch) they fail at around 15-20% when copying across sda3 which I assume to be the main partition. The error we seem to see the most is a CRC error but when I look through the logs I see a lot of the following:
** Starting Image Download For /dev/sda3 **
lie_reporter 14 partclone & lz4 -d /storage/images/TEST2/hd0/part3.ntfs.lz4 | partclone.ntfs -B -r -o /dev/sda3
Partclone v0.2.90 http://partclone.org
Starting to restore image (-) to device (/dev/sda3)
we need memory: 855096 bytes
image head 4160, bitmap 846836, crc 4100 bytes
Calculating bitmap... Please wait... get device size 126168858624 by ioctl BLKGETSIZE64,
File system: NTFS
Device size: 27.7 GB = 6774658 Blocks
Space in use: 25.5 GB = 6215999 Blocks
Free Space: 2.3 GB = 558659 Blocks
Block size: 4096 Byte
CRC error, block_id=1441097...
Mounting volume... OK
Processing of $MFT and $MFTMirr completed successfully.
Checking the alternate boot sector... FIXED
NTFS volume version is 3.1.
Going to un-mark the bad clusters ($BadClus)... No bad clusters...OK
NTFS partition /dev/sda3 was processed successfully.
** Expanding NTFS Volume on /dev/sda3 **
Expanding NTFS Volume To: 126158372864
ntfsresize v2017.3.23 (libntfs-3g)
Device name : /dev/sda3
NTFS volume version: 3.1
Cluster size : 4096 bytes
Current volume size: 27748999680 bytes (27749 MB)
Current device size: 126168858624 bytes (126169 MB)
New volume size : 126158369280 bytes (126159 MB)
Checking filesystem consistency ...
Inode is corrupt (34846): Input/output error
Inode is corrupt (34848): Input/output error
Inode is corrupt (34852): Input/output error
Inode is corrupt (34854): Input/output error
Inode is corrupt (34856): Input/output error
Inode is corrupt (34860): Input/output error
Inode is corrupt (34862): Input/output error
Inode is corrupt (34867): Input/output error
Inode is corrupt (34899): Input/output error
Inode is corrupt (34917): Input/output error
......... (so on for a long time)
I have attached the log file from the system we used to test the deploy to as well as the upload log from a successful upload.
I tried the "Remove GTP Structures" and that didnt work neither did "Don't Shrink Volumes"
Any ideas at all?
Sorry attachments added.
This topic can be closed. I have resolved the issue.
I created a blank image profile and then ticked the box for "Don't Shrink Volume" and it took the image fine. Deploys work fine as well.
clonedeploy_admin last edited by
Thanks for the update.